LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 315 (Engine Control System & Fuel System - 5.3L - Introduction, Service & Repair) >> Repair Instructions >> Air Cleaner Assembly Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 GMC Canyon and 2009 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Integral Air Cleaner Housing & Bolts
    GM1899698Courtesy of GENERAL MOTORS CORP.
  1. Install the air cleaner housing (1) to the vehicle.
    2. CAUTION: Refer to Fastener Caution .
  2. Tighten the integral air cleaner housing bolts (2).

    Tighten:  Tighten the bolts to 15 N.m (11 lb ft).

    3. Fig 2: MAF/IAT Sensor
    GM1897141Courtesy of GENERAL MOTORS CORP.
  3. Connect the engine wiring harness electrical connector (1) to the MAF/IAT sensor.
  4. Install the air cleaner outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement .
scientia non olet · About LEMON Manuals