Removal Procedure
WARNING: This page is about a different car, the 2008 Isuzu i-370, 2008 Isuzu i-290, 2008 GMC Canyon, and 2008 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
- Use a flat-bladed tool in order to disengage the electrical harness cover (2) from the mirror (4), if equipped.
- Push the mirror upward in order to access the screw.
- Using a Torx ® screwdriver, loosen the set screw (3) that holds the mirror base to the windshield support button.
- Disengage the electrical connector (1), if equipped.
- Slide the mirror (4) upward off of the windshield support button.