LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Lighting Systems) >> Repair Instructions >> License Lamp Bulb Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Isuzu i-370, 2008 Isuzu i-290, 2008 GMC Canyon, and 2008 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of License Lamp Assembly
    GM1388043Courtesy of GENERAL MOTORS CORP.
  1. Install the bulb to the lamp socket.
  2. Twist the lamp socket clockwise to install.
  3. Install the lamp assembly (1) into the bumper.
    4. NOTE: Refer to Fastener Notice .
  4. Install the license lamp nut (3).

    Tighten:  Tighten the nut to 2.5 N.m (22 lb in).

  5. Install the electrical connector (2).
  6. Inspect the lamp operation.
scientia non olet · About LEMON Manuals