LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Lighting Systems) >> Repair Instructions >> High Mount Stop Lamp Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Isuzu i-370, 2008 Isuzu i-290, 2008 GMC Canyon, and 2008 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of High Mounted Stop Lamp
    GM1373074Courtesy of GENERAL MOTORS CORP.
  1. Install the bulbs into the lamp sockets.
  2. Install the lamp sockets into the high mounted stop lamp and twist clockwise to secure.
  3. Install the high mount stop lamp to the vehicle.
    4. NOTE: Refer to Fastener Notice .
  4. Install the screws that retain the high mounted stop lamp to the vehicle.

    Tighten:  Tighten the screws to 2.5 N.m (22 lb in).

scientia non olet · About LEMON Manuals