Installation Procedure

WARNING: This page is about a different car, the 2008 Isuzu i-370, 2008 Isuzu i-290, 2008 GMC Canyon, and 2008 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Park Lamp, High Beam Headlamp, Low Beam Headlamp, & Front Side Marker Bulb

Courtesy of GENERAL MOTORS CORP.

Connect the electrical connector to the bulb.
Push in and rotate the high beam headlamp (2), low beam headlamp (3) 1/4 turn clockwise in order to install the bulb.

NOTE: Refer to Fastener Notice .

Install the bolts that retain the headlamp.
Tighten: Tighten the bolts to 10 N.m (89 lb in).
Inspect the headlamps for proper operation.
Install the front grille. Refer to Grille Replacement .