LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Lighting Systems) >> Repair Instructions >> Backup Lamp Bulb Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Isuzu i-370, 2008 Isuzu i-290, 2008 GMC Canyon, and 2008 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Tail Lamp Assembly
    GM1376204Courtesy of GENERAL MOTORS CORP.
  1. Install the bulbs to the backup lamp sockets.
  2. Install the backup lamp rotating clockwise until the locking tab is fully seated.
    3. Fig 2: View Of Tail Lamp Screws
    GM1373072Courtesy of GENERAL MOTORS CORP.
  3. Press the tail lamp to the rear body panel until fully seated.
    4. NOTE: Refer to Fastener Notice .
  4. Install the tail lamp screws (1) to the tail lamp.

    Tighten:  Tighten the tail lamp screws (1) to 3 N.m (26 lb in).

  5. Close the tailgate.
scientia non olet · About LEMON Manuals