Removal Procedure
WARNING: This page is about a different car, the 2009 GMC Canyon and 2009 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle, high enough to access the top of the fuel tank through the wheelhouse liner. Refer to Lifting and Jacking the Vehicle .
- If the vehicle is crew cab, lower the fuel tank. Refer to Fuel Tank Replacement .
- Remove the left rear pickup box wheelhouse liner. Refer to Pickup Box Wheelhouse Liner Replacement .
- Disconnect the chassis wiring harness electrical connector from the fuel tank pressure sensor (1).
- Pull upward in order to remove the sensor from the fuel tank module.