LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 281 (Engine Control System & Fuel System - 3.7L - Introduction, Service & Repair) >> Repair Instructions >> Fuel Injection Fuel Rail Assembly Replacement >> Disassembly Procedure

Disassembly Procedure

WARNING: This page is about a different car, the 2009 GMC Canyon and 2009 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Fuel Injector Harness Clips and Upper O-Ring Seals
    GM1772115Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel injector harness clips from the fuel rail and remove the harness (1).
  2. Remove the fuel injector retainers (2).
  3. Remove the fuel injectors (4).
  4. Remove the fuel injector upper O-ring seals (3) from the injectors.
scientia non olet · About LEMON Manuals