LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 264 (Lighting Systems) >> Repair Instructions >> Headlamp Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 GMC Canyon and 2009 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the knee bolster trim panel. Refer to Driver Knee Bolster Panel Replacement .
    2. Fig 1: View Of Headlamp Switch
    GM1326608Courtesy of GENERAL MOTORS CORP.
  2. Remove the screw retaining the switch to the instrument panel (I/P).
  3. Partially remove the switch from the I/P.
  4. Disconnect the switch electrical connector.
  5. Remove the switch from the vehicle.
scientia non olet · About LEMON Manuals