LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Battery, Charging System And Starting System) >> Repair Instructions >> Starter Motor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Isuzu i-370, 2008 Isuzu i-290, 2008 GMC Canyon, and 2008 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Battery Positive Cable At Starter
    GM1313639Courtesy of GENERAL MOTORS CORP.
  1. Remove the intake manifold. Refer to Intake Manifold Replacement or Intake Manifold Replacement .
  2. Remove the starter solenoid S terminal nut (3) and disconnect the lead (4) from the starter.
  3. Remove the starter terminal nut (1) and disconnect the battery positive cable (2) from the starter.
    4. Fig 2: View Of Starter Motor
    GM1313646Courtesy of GENERAL MOTORS CORP.
  4. Remove the starter motor mounting nut (1) and bolt (4).
  5. Remove the starter motor (3) from the engine.
scientia non olet · About LEMON Manuals