LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 216 (Suspension Control System - Suspension Damping) >> Repair Instructions >> Electronic Suspension Control Module Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the right rear trim panel.
  2. Fig 1: View Of Electronic Suspension Control Module
    GM1530519Courtesy of GENERAL MOTORS CORP.
  3. Loosen the electronic suspension control (ESC) module nuts (3).
  4. Disconnect the ESC module electrical connector (1).
  5. Remove the ESC module (2).