LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 213 (Engine Cooling System) >> Repair Instructions >> Engine Cooling Fan Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Cooling Fan Shroud To Radiator Retaining Bolts
    GM1363014Courtesy of GENERAL MOTORS CORP.
  1. Install the cooling fan assembly.
    2. NOTE: Refer to Fastener Notice .
  2. Install the retaining bolts that secure the cooling fan shroud to the radiator.

    Tighten:  Tighten the bolts to 5.4 N.m (48 lb in).

  3. Engage the surge tank inlet hose to the retaining features on the cooling fan shroud.
  4. Connect the condenser tube to the cooling fan shroud retainer clip.
  5. Install the auxiliary water pump and any hoses.
  6. Connect any hoses or pipes.
  7. Connect the cooling fan electrical connectors.
  8. Install the air cleaner outlet duct. Refer to Air Cleaner Inlet Duct Replacement .
scientia non olet · About LEMON Manuals