LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 199 (Anti-Lock Brake System, Traction Control System & Stability Control System) >> Diagnostic Information and Procedures >> DTC C0035-C0050 >> Component Testing

Component Testing

WARNING: This page is about a different car, the 2008 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the harness connector at the suspect wheel speed sensor.
  2. Test for 850-1350 ohms of resistance between terminal A and terminal B of the wheel speed sensor.
    • If not within the specified range, replace the wheel speed sensor.
  3. Test for greater than 100 mV AC voltage between terminal A and terminal B of the wheel speed sensor, when spinning the wheel.
    • If not within the specified range, replace the wheel speed sensor.
scientia non olet · About LEMON Manuals