LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 194 (Wiring Systems And Power Management - Introduction) >> Repair Instructions >> Ignition and Start Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument cluster trim panel. Refer to Instrument Cluster Trim Panel Replacement .
    2. Fig 1: View Of Ignition Switch & Trim Panel
    GM1466128Courtesy of GENERAL MOTORS CORP.
  2. Release the tabs securing the switch (1) to the trim panel.
  3. Remove the switch.
scientia non olet · About LEMON Manuals