Cruise Control Module with Distance Sensing Scan Tool Information
WARNING: This page is about a different car, the 2008 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
Distance Sensing Cruise Control Scan Tool Output Controls
| Scan Tool Output Control | Description |
|---|---|
| Factory Reset | The scan tool changes the adaptive cruise module (ACM) Auto Alignment Learn Status parameter from Aligned to Not Aligned. Once in the Not Aligned state, the vehicle must be driven at speeds of at least 56 km/h (35 mph) and find at least 40 acceptable targets in order to correct the auto alignment status to Aligned. |
| DSCC Setup (Japan Only) | The scan tool enables the Adaptive Cruise Module (ACM) to calibrate itself after ACM replacement. |