LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Frame And Underbody) >> Repair Instructions >> Tow Hook Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Isuzu i-370, 2008 Isuzu i-290, 2008 GMC Canyon, and 2008 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Left Tow Hook & Components
    GM1253085Courtesy of GENERAL MOTORS CORP.
  1. Install the left tow hook to the frame rail.
    2. NOTE: Refer to Fastener Notice .
  2. Install the nuts and the bolts to the frame rail.

    Tighten:  Tighten the bolts to 100 N.m (74 lb ft).

    3. Fig 2: View Of Right Tow Hook & Components
    GM1253083Courtesy of GENERAL MOTORS CORP.
  3. Install the left tow hook to the frame rail.
  4. Install the nuts and the bolts to the frame rail.

    Tighten:  Tighten the bolts to 100 N.m (74 lb ft).

  5. Install the front bumper. Refer to Front Bumper Replacement .
scientia non olet · About LEMON Manuals