Installation Procedure

WARNING: This page is about a different car, the 2008 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Battery Retainer Bolt

Courtesy of GENERAL MOTORS CORP.

Install the battery into the vehicle.

NOTE: Refer to Fastener Notice .

Install the battery retainer and bolt.
Tighten: Tighten the bolt to 18 N.m (13 lb ft).

Fig 2: View Of Battery Heat Shield

Courtesy of GENERAL MOTORS CORP.

Install the battery heat shield. Refer to Battery Heat Shield Replacement .

Fig 3: View Of Battery Cables

Courtesy of GENERAL MOTORS CORP.

Connect the battery positive cable (1) to the battery.
Tighten: Tighten the bolt to 17 N.m (13 lb ft).
Connect the battery negative cable (2). Refer to Battery Negative Cable Disconnection and Connection .