LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Steering Wheel & Steering Column) >> Repair Instructions >> Multifunction Turn Signal Switch Housing Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Isuzu i-370, 2008 Isuzu i-290, 2008 GMC Canyon, and 2008 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Multifunction Turn Signal Switch Mounting Plate
    GM1492306Courtesy of GENERAL MOTORS CORP.
  1. Install the multifunction turn signal switch housing.
    2. NOTE: Refer to Fastener Notice .
  2. Install the multifunction turn signal switch housing bolts.

    Tighten:  Tighten the bolts to 2.5 N.m (22 lb in).

  3. Install the turn signal multifunction switch. Refer to Turn Signal Multifunction Switch Replacement .
scientia non olet · About LEMON Manuals