LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 121 (Wiper System & Washer System) >> Repair Instructions >> Washer Solvent Container Level Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Chevrolet Malibu Classic. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain the washer solvent from the washer solvent container.
  2. Remove the left front fender liner. Refer to Front Fender Liner Replacement .
    3. Fig 1: Exploded View Of Washer Solvent Container
    GM1207514Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the washer solvent container level sensor electrical connector.
  4. Using a small flat-bladed tool, remove the washer solvent level sensor (4) from the washer solvent container (1).
  5. Using a small flat-bladed tool, remove the level sensor seal (3) from the washer solvent container (1).
scientia non olet · About LEMON Manuals