LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 118 (Wiring Systems And Power Management - Component Views & Component Connector End Views) >> Component Connector End Views >> Adjustable Pedal Module

Adjustable Pedal Module

WARNING: This page is about a different car, the 2008 Chevrolet Malibu Classic. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Adjustable Pedal Module Connector End View
GM39746Courtesy of GENERAL MOTORS CORP.
Adjustable Pedal Module

Pin Wire Circuit Function
A 0.35 L-BU 5499 Adjustable Pedal Enable Signal
B 0.35 PK 5289 Adjustable Pedals Position Sensor Signal
C - - Not Used
D 0.35 BN/WH 5288 Adjustable Pedals Position Sensor Low Reference
E 0.8 BK/WH 651 Ground
F 0.35 WH 5287 Adjustable Pedals Position Sensor 5-Volt Reference
G 0.35 L-GN 5980 Adjustable Pedal Inhibit Signal
H 0.35 RD/WH 740 Battery Positive Voltage
Connector Part Information 
  • OEM: 12064862
  • Service: 12126438
  • Description: 8-Way F Metri-Pack 150 Series (BK)
Terminal Part Information 
  • Pins: A-B, D, F-H
  • Terminal/Tray: 12064971/5
  • Core/Insulation Crimp: E/C
  • Release Tool/Test Probe: 12094429/J-35616-2A (GY)
  • Pins: E
  • Terminal/Tray: 12047767/2
  • Core/Insulation Crimp: E/A
  • Release Tool/Test Probe: 12094429/J-35616-2A (GY)
scientia non olet · About LEMON Manuals