Removal Procedure

WARNING: This page is about a different car, the 2008 Chevrolet Malibu Classic. However, it is still accessible from the selected car via links, so may be relevant.

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
Remove the wheel bearing. Refer to Front Wheel Bearing and Hub Replacement .

Fig 1: View Of Tie Rod End To Steering Knuckle

Courtesy of GENERAL MOTORS CORP.

Remove the outer tie rod to knuckle nut.

Fig 2: Separating Outer Tie Rod End From Steering Knuckle

Courtesy of GENERAL MOTORS CORP.

Using the J 24319-B , separate the tie rod from the steering knuckle.
Remove the lower control arm. Refer to Lower Control Arm Replacement .

Fig 3: View Of Strut-To-Steering Knuckle Nuts & Bolts

Courtesy of GENERAL MOTORS CORP.

Remove the strut to steering knuckle nuts and bolts.
Remove the steering knuckle from the vehicle.