LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 106 (Sunroof System) >> Repair Instructions >> Sunroof Window Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Chevrolet Malibu Classic. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Sunroof Window
    GM791501Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Ensure that the window trade mark is at the rear of the opening.
  1. Position the sunroof window into the opening.
    2. Fig 2: View Of Sunroof Window Screws On Both Sides
    GM1222466Courtesy of GENERAL MOTORS CORP.
  2. Install the sunroof window screws. Do not tighten the screws.
  3. Carefully close the sunroof window from the vent position to the full closed position.
  4. Adjust the sunroof window. Refer to Sunroof Window Height and Opening Fit Adjustment .
  5. Close the sunshade.
  6. Cycle the sunroof window to ensure proper operation and fit.
scientia non olet · About LEMON Manuals