LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 106 (Sunroof System) >> Repair Instructions >> Sunroof Sunshade Stop Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Chevrolet Malibu Classic. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Sunshade Stop
    GM1224101Courtesy of GENERAL MOTORS CORP.
  1. It is only necessary to lower the headliner. Only do those step in headliner replacement that will lower the headliner enough to gain access to the part. Refer to Headlining Trim Panel Replacement (Sedan) .
  2. Pull the sunshade stop from the sunroof cable drive tube retainer. Carefully scrape off any remaining foam.
  3. Use a clean rag and 3M™ General Purpose Adhesive Cleaner 08984 or equivalent, in order to remove any adhesive or residue from the sunshade track.