Removal Procedure

WARNING: This page is about a different car, the 2008 Chevrolet Malibu Classic. However, it is still accessible from the selected car via links, so may be relevant.

Remove the sunroof window panel from the sunroof module. Refer to Sunroof Window Replacement .
Close the sunshade to within a hand-width of full closure.
From the top of the vehicle, push the sunshade toward the far side of the sunroof window track assembly.

Fig 1: Identifying Sunshade Arching Point

Courtesy of GENERAL MOTORS CORP.

Carefully arch the sunshade upward at the center of the forward edge.
Lift upward on the forward edge of the sunshade until the front sunshade guide is released from the track assembly.
Slightly rotate the sunshade forward. Carefully arch the sunshade upward at the center of the rearward edge.
Lift upward on the rearward edge of the sunshade until the rear sunshade guide is released from the track assembly.

Fig 2: Identifying Sunshade Retainers

Courtesy of GENERAL MOTORS CORP.

Lift upward and pull the sunshade to release the front and the rear guides from the track on the far side.
Remove the sunshade from the sunroof module. Ensure that the guides are still retained to the tabs on the sunshade.