LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 106 (Sunroof System) >> Repair Instructions >> Sunroof Cable Drive Tube Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Chevrolet Malibu Classic. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Sunroof Module
    GM1222469Courtesy of GENERAL MOTORS CORP.
  1. Remove the sunroof module from the vehicle. Refer to Sunroof Module Assembly Replacement .
    2. Fig 2: View Of Sunroof Motor/Actuator Assembly
    GM1222467Courtesy of GENERAL MOTORS CORP.
  2. Remove the sunroof motor. Refer to Sunroof Motor/Actuator Replacement .
    3. Fig 3: View Of Rivets From Sunroof Cable Drive Tube Retainers
    GM1224103Courtesy of GENERAL MOTORS CORP.
  3. Remove the rivets from the sunroof cable drive tube retainers which secure the drive tube to the sunroof window track assembly. The 2 rivets are situated on each side.
    4. Fig 4: View Of Cable Drive Tube And Track Assembly
    GM1224104Courtesy of GENERAL MOTORS CORP.
  4. Pull the cable drive tube straight out from the track assembly, allowing the cables to release freely from the tubes.
scientia non olet · About LEMON Manuals