LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 102 (Engine Cooling System) >> Diagnostic Information and Procedures >> Cooling Fan Always On >> Circuit/System Testing

Circuit/System Testing

WARNING: This page is about a different car, the 2008 Chevrolet Malibu Classic. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: You must perform the Circuit/System Verification before proceeding with Circuit/System Testing.
  1. Ignition OFF, leave the series/parallel relay in place while disconnecting the other relays.
  2. Ignition ON, observe that the fans are not activated.
    • If the fans are not activated, replace the faulty relay.
    • If a fan is activated, test the fan voltage supply circuits for a short to voltage.
scientia non olet · About LEMON Manuals