LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Supplemental Inflatable Restraint System) >> Diagnostic Information and Procedures >> DTC B1530 >> Circuit/System Testing

Circuit/System Testing

WARNING: This page is about a different car, the 2008 Isuzu i-370, 2008 Isuzu i-290, 2008 GMC Canyon, and 2008 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: If the SDM has DTC B0092 or DTC B0098 stored as current, you must address those DTCs before continuing with this diagnostic procedure.
  1. With a scan tool, check for DTC B0092 or DTC B0098 is a current DTC.
  2. If the PPS has been replaced then DTC B1530 will automatically be cleared. If the PPS was repaired and DTC B1530 is set as current, the SDM will have to be replaced.
    • Replace the SDM.
scientia non olet · About LEMON Manuals