LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Supplemental Inflatable Restraint System) >> Diagnostic Information and Procedures >> DTC B0098 >> Circuit/System Testing

Circuit/System Testing

WARNING: This page is about a different car, the 2008 Isuzu i-370, 2008 Isuzu i-290, 2008 GMC Canyon, and 2008 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify that the vehicle has the correct PPS and SDM installed.
    • If an incorrect PPS or SDM has been installed, replace the incorrect component and perform the programming procedure for that component.
  2. If the correct components are installed and DTC B0098 is set as a current DTC, replace the PPS.
    • Replace the PPS and rezero the system.
  3. If after replacement of the PPS, DTC B0098 is set as current, replace the SDM.
    • Replace the SDM and perform the SDM Setup procedure.
scientia non olet · About LEMON Manuals