LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Supplemental Inflatable Restraint System) >> Diagnostic Information and Procedures >> DTC 024 >> Circuit/System Testing

Circuit/System Testing

WARNING: This page is about a different car, the 2008 Isuzu i-370, 2008 Isuzu i-290, 2008 GMC Canyon, and 2008 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF. Inspect the PPS and main seat harness connectors for corrosion or damage.
    • If any of the above conditions are found, make the appropriate repair.
  2. Test the PPS ground circuit for an open/high resistance.
    • If any of the above conditions are found, make the appropriate repair.
  3. Test the PPS ignition 1 voltage circuit for a short to ground or an open/high resistance.
    • If any of the above conditions are found, make the appropriate repair.
  4. Reconnect all components, clear codes and recheck for DTC 024. Refer to Passenger Presence System Flash Code Procedures . If DTC 024 resets, replace and rezero the PPS.
    • After replacement and rezeroing of the PPS are completed, perform the repair verification.
scientia non olet · About LEMON Manuals