LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Engine Exhaust >> Repair Instructions >> Exhaust Pipe Heat Shield Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Exhaust Pipe heat Shield Nuts
    GM1902753Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  1. Install the exhaust pipe heat shield (1) and nuts (2), if necessary.

    Tighten:  Tighten the nuts to 9 N.m (80 lb in).

    2. Fig 2: Exhaust Pipe Heat Shield Replacement
    GM1902752Courtesy of GENERAL MOTORS CORP.
  2. Install the exhaust pipe heat shield (1) and nuts (2), if necessary.

    Tighten:  Tighten the nuts to 9 N.m (80 lb in).

  3. Lower the vehicle.
scientia non olet · About LEMON Manuals