LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Automatic >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Diagnostic Information and Procedures >> DTC P0615 >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON, verify that no immobilizer or automatic transmission DTCs are set that would cause the ECM not to enable engine starting.
  2. Clear the DTCs from the ECM. Turn the ignition to the start position. The engine should crank.
  3. Verify that DTC P0615 is not set.
scientia non olet · About LEMON Manuals