LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Automatic >> Repair and Diagnosis >> Body & Frame >> Sun Roof/T-Top/Convertible Top >> Sunroof >> Repair Instructions >> Sunroof Module Assembly Replacement

Sunroof Module Assembly Replacement

Fig 1: Sunroof Module Assembly
GM1556110Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedures

  1. Remove the sunroof window. Refer to Sunroof Window Replacement .
  2. It is only necessary to lower the headliner. Only do those steps in headliner replacement that will lower the headliner enough to gain access to the part. Refer to Headlining Trim Panel Replacement .
  3. Remove the sunroof motor/actuator. Refer to Sunroof Motor/Actuator Replacement .
  4. Remove the sunshade. Refer to Sunroof Sunshade Assembly Replacement .
1 Sunroof Drain Hose (Qty: 4)
Procedure: 
Unplug the drain hoses from each side of the drain weeper valve.
2 Sunroof Module Nut (Qty: 10)
NOTE: Refer to Fastener Notice .

Tip:  There are 3 nuts down each side and 4 across the front.

Tighten:  9 N.m (80 lb in)

3 Sunroof Module