LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Automatic >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls And Fuel - 3.7L - DTC P0366 To DTC P2444 >> DTC P0411 >> Circuit/System Verification

Circuit/System Verification

  1. If any other AIR DTCs are set, perform those diagnostics first.
  2. Inspect the AIR solenoid outlet pipe for leaks.
  3. Engine running, observe that the AIR Pressure Sensor parameter approximately equals BARO.
  4. Engine running, enable the AIR pump with a scan tool and observe that the AIR Pressure Sensor parameter equals approximately 20-25 kPa above barometric pressure (BARO).
  5. Engine running, enable the AIR system with a scan tool and observe that the AIR Pressure Sensor parameter equals approximately 8-10 kPa above BARO.
scientia non olet · About LEMON Manuals