LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Alpha >> Repair and Diagnosis >> External Pages >> Different car >> Section 536 (Instrument Panel Trim And Console Trim) >> Repair Instructions >> Center Console End Panel Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Center Console End Panel
    GM1442978Courtesy of GENERAL MOTORS CORP.
  1. Release the retaining clips using a blunt trim tool.
  2. Disconnect the wire harness connectors.
  3. Remove the end panel trim panel.
  4. If replacing the trim panel, transfer all necessary components.
scientia non olet · About LEMON Manuals