LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Alpha >> Repair and Diagnosis >> External Pages >> Different car >> Section 533 (Sunroof System) >> Repair Instructions >> Sunroof Window Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Sunroof Window Screws
    GM468350Courtesy of GENERAL MOTORS CORP.
  1. Position the sunroof window (3) into the opening, with the window trade mark pointing rearward.
  2. Install the sunroof window screws (1).
  3. Finger tighten the screws, do not tighten.
  4. Carefully close the sunroof window from the vent position to the full closed position.
  5. Fig 2: Sunroof Panel Side Opening Closeout Covers
    GM786923Courtesy of GENERAL MOTORS CORP.
  6. Adjust the sunroof window. Refer to Sunroof Window Height and Opening Fit Adjustment .
  7. Connect the sunroof panel side opening closeout covers (2) to the sunroof window clips.
  8. Snap the sunroof panel side opening closeout covers into the sunroof window retention clips.
  9. Close the sunshade.
  10. Cycle the sunroof window to ensure proper operation and fit.