LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Alpha >> Repair and Diagnosis >> External Pages >> Different car >> Section 510 (Tires And Wheels) >> Repair Instructions >> Tire Repair >> Buffing

Tire Repair: Buffing

WARNING: This page is about a different car, the 2010 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Buffing Within Marked Area
    GM1411033Courtesy of GENERAL MOTORS CORP.
  1. To prevent contamination and preserve the outline, buff within the marked area thoroughly and evenly with a low speed buffing tool using a fine wire brush or gritted rasp.
  2. Buff to a smooth velvet surface (RMA number 1 or number 2 buffed texture).
  3. Use caution not to gouge the inner liner or expose casing fabric.
  4. Remove any buffing dust with a vacuum cleaner.
  5. Consult your repair material supplier for a proper buffing tool.
scientia non olet · About LEMON Manuals