LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Alpha >> Repair and Diagnosis >> External Pages >> Different car >> Section 329 (Hybrid Engine Control System) >> Diagnostic Information and Procedures >> DTC P0C2F >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2008 GMC Yukon and 2008 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.
    IMPORTANT: Diagnose ECM DTCs P0335 and P0336 prior to performing this procedure.
  1. Clear the DTC information.
  2. Turn the ignition OFF for 1 minute.
  3. Attempt to start the engine.
  4. Retest for DTC P0C2F.
scientia non olet · About LEMON Manuals