LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Alpha >> Repair and Diagnosis >> External Pages >> Different car >> Section 170 (Fixed & MOVEABLE Window Systems) >> Repair Instructions >> Windshield Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the window into the opening. Refer to Adhesive Installation of Stationary Windows .
  2. Install the windshield side reveal moldings, if equipped. Refer to Windshield Side Reveal Molding Replacement .
  3. Install the outside moisture sensor if equipped.
  4. Install the Vehicle Direction Alert Alarm Warning (VDAAW ) Module. If equipped. Refer to Vehicle Direction Alert Alarm Warning Module Calibration .
  5. Install the rearview mirror. Refer to Inside Rearview Mirror Replacement (UE1) or Inside Rearview Mirror Replacement (DD7, DD8) .
  6. Install the interior windshield garnish moldings. Refer to Windshield Pillar Garnish Molding Replacement .
  7. Install the air inlet grille. Refer to Air Inlet Grille Panel Replacement .
  8. Install the windshield wipers arms. Refer to Windshield Wiper Arm Replacement .
  9. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
  10. Close the hood.
scientia non olet · About LEMON Manuals