LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Alpha >> Repair and Diagnosis >> External Pages >> Different car >> Section 166 (Power Seat System) >> Repair Instructions >> Power Seat Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Chevrolet Malibu Classic. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Power Seat Switch
    GM1331151Courtesy of GENERAL MOTORS CORP.
  1. Install the power seat switch to the outer trim panel on the seat cushion.
    2. Fig 2: View Of Electrical Connector
    GM1331153Courtesy of GENERAL MOTORS CORP.
  2. Connect the electrical connector.
  3. Install the outer trim panel. Refer to Front Seat Cushion Outer Trim Panel Replacement .
scientia non olet · About LEMON Manuals