LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Alpha >> Repair and Diagnosis >> External Pages >> Different car >> Section 139 (Disc Brake System) >> Repair Instructions >> Rear Brake Shield Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Chevrolet Malibu Classic. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Wheel Bearing/Hub Assembly Nuts
    GM1276112Courtesy of GENERAL MOTORS CORP.
  1. Install the shield to the wheel knuckle.
  2. Install the wheel bearing/hub. Refer to Rear Wheel Bearing and Hub Replacement .
scientia non olet · About LEMON Manuals