LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Alpha >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 5.3L - Introduction (2 Of 2) >> Repair Instructions >> Air Cleaner Assembly Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Integral Air Cleaner Housing Bolts
    GM1899698Courtesy of GENERAL MOTORS CORP.
  1. Install the air cleaner housing (1) to the vehicle.
    2. NOTE: Refer to Fastener Notice .
  2. Tighten the integral air cleaner housing bolts (2).

    Tighten:  Tighten the bolts to 15 N.m (11 lb ft).

    3. Fig 2: Engine Wiring Harness Electrical Connector
    GM1897141Courtesy of GENERAL MOTORS CORP.
  3. Connect the engine wiring harness electrical connector (1) to the MAF/IAT sensor.
  4. Install the air cleaner outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement .
scientia non olet · About LEMON Manuals