LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Adventure, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 467 (Battery, Charging System And Starting System) >> Repair Instructions >> Generator Bracket Replacement (LLT) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Generator Bracket Bolts
    GM887707Courtesy of GENERAL MOTORS CORP.
  1. Turn the ignition OFF.
  2. Remove the generator. Refer to Generator Replacement (LLT) .
  3. Remove the coolant inlet pipe lower bolt from the generator bracket.
  4. Remove the belt tensioner. Refer to Water Pump and Generator Belt Tensioner Replacement .
  5. Remove the generator bracket bolts.
  6. Remove the generator bracket.
scientia non olet · About LEMON Manuals