LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Adventure, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 467 (Battery, Charging System And Starting System) >> Repair Instructions >> Battery Replacement (Side Post) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Battery Retainer & Bolt
    GM1296795Courtesy of GENERAL MOTORS CORP.
  1. Install the battery into the vehicle.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the battery retainer and bolt and tighten to 18 N.m (13 lb ft).
    3. Fig 2: Battery Heat Shield
    GM1296794Courtesy of GENERAL MOTORS CORP.
  3. Install the battery heat shield. Refer to Battery Heat Shield Replacement .
    4. Fig 3: Battery Cables, Retaining Clip & Bolt To Shock Tower
    GM1201077Courtesy of GENERAL MOTORS CORP.
  4. Connect the battery positive cable (1) to the battery and bolt and tighten to 17 N.m (13 lb ft).
  5. Connect the battery negative cable (2). Refer to Battery Negative Cable Disconnection and Connection (Side Post) .
scientia non olet · About LEMON Manuals