Removal Procedure

WARNING: This page is about a different car, the 2010 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Battery Positive & Negative Cables (Side Post Shown)

Courtesy of GENERAL MOTORS CORP.

Disconnect the battery negative cable (2). Refer to Battery Negative Cable Disconnection and Connection (LHD With Top Post) or Battery Negative Cable Disconnection and Connection (Side Post) .
Disconnect the battery positive cable (1) from the battery.
Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement .

Fig 2: Battery Heat Shield Locking Tabs

Courtesy of GENERAL MOTORS CORP.

Depress the locking tabs (1) on the side of the battery heat shield.

Fig 3: Battery Heat Shield

Courtesy of GENERAL MOTORS CORP.

Remove the battery heat shield from the battery.