LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Adventure, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 365 (Lighting System) >> Repair Instructions >> Headlamp Leveling Front Suspension Height Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the right front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
    3. Fig 1: View Of Front Headlamp Leveling Sensor Electrical Connector
    GM802719Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the electrical connector (1).
    4. Fig 2: View Of Ball & Socket
    GM802716Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the ball and socket (1) from the vehicle.
  5. Remove the bolt (2) from the sensor.
  6. Remove the sensor from the vehicle.
scientia non olet · About LEMON Manuals