Installation Procedure

WARNING: This page is about a different car, the 2009 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Mode Actuator

Courtesy of GENERAL MOTORS CORP.

Install the mode actuator.

Fig 2: Identifying Mode Actuator Screws

Courtesy of GENERAL MOTORS CORP.

CAUTION: Refer to Fastener Caution .

Install the mode actuator screws (2) and tighten to 1 N.m (9 lb in ).

Fig 3: View Of Mode Actuator Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Connect the electrical connector to the actuator.
Install the I/P carrier. Refer to Instrument Panel Carrier Replacement .