LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2007 >> H3 Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Disc Brake System) >> Repair Instructions >> Disc Brake Splash Shield Replacement - Front >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 GMC Canyon and 2005 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Steering Knuckle Mounting Bolts
    GM1363887Courtesy of GENERAL MOTORS CORP.
  1. With the aid of an assistant, hold 2 of the 4 mounting bolts in the steering knuckle across from each other.
    2. Fig 2: View Of Disc Brake Splash Shield
    GM1363833Courtesy of GENERAL MOTORS CORP.
  2. Position the splash shield on the steering knuckle.
    3. Fig 3: View Of Wheel Hub/Speed Sensor Assembly
    GM1253296Courtesy of GENERAL MOTORS CORP.
  3. Install the wheel hub and speed sensor assembly. Refer to Wheel Hub/Speed Sensor Replacement in Front Suspension.
  4. Lower the vehicle.
scientia non olet · About LEMON Manuals