Removal Procedure

WARNING: This page is about a different car, the 2005 GMC Canyon and 2005 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Brake Caliper

Courtesy of GENERAL MOTORS CORP.

Remove the brake caliper from the mounting bracket. Refer to Brake Caliper Replacement .

Fig 2: Supporting Brake Caliper

Courtesy of GENERAL MOTORS CORP.

Relocate brake caliper and support.

Fig 3: View Of Outboard Brake Pad

Courtesy of GENERAL MOTORS CORP.

Remove the outboard brake pad from the mounting bracket.

Fig 4: View Of Inboard Brake Pad

Courtesy of GENERAL MOTORS CORP.

Remove the inboard brake pad from the mounting bracket.

Fig 5: View Of Mounting Bracket Guide Pin

Courtesy of GENERAL MOTORS CORP.

Remove guide pins from mounting bracket.

Fig 6: View Of Mounting Bracket Guide Pin Seal

Courtesy of GENERAL MOTORS CORP.

Remove the guide pin seal from the mounting bracket.

Fig 7: View Of Brake Pad Retaining Clips

Courtesy of GENERAL MOTORS CORP.

Remove the brake pads shims from the mounting bracket.
Clean the brake caliper mounting bracket with denatured alcohol.
Dry the brake caliper mounting bracket using non-lubricated, filtered air.