LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2007 >> H3 Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Disc Brake System) >> Repair Instructions >> Brake Caliper Bracket Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 GMC Canyon and 2005 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Brake Caliper Mounting Bracket
    GM1241358Courtesy of GENERAL MOTORS CORP.
  1. Position the mounting bracket on the steering knuckle.
    2. Fig 2: View Of Brake Caliper Mounting Bracket Mounting Bolts
    GM1241469Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the mounting bolts bracket.

    Tighten:  Tighten the mounting bolts to 175 N.m (129 lb ft).

  3. Install the brake pads in the mounting bracket.
    4. Fig 3: Identifying Brake Caliper
    GM1241368Courtesy of GENERAL MOTORS CORP.
  4. Install the brake caliper. Refer to Brake Caliper Replacement 
scientia non olet · About LEMON Manuals