LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2007 >> H3 Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Interior Trim) >> Repair Instructions >> Assist Handle Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 GMC Canyon and 2005 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Service Holes
    GM1276791Courtesy of GENERAL MOTORS CORP.
  1. Pull down the assist handle to reveal the 2 service holes.
    2. Fig 2: View Of Assist Handle & Screw
    GM1364955Courtesy of GENERAL MOTORS CORP.
  2. Remove the screws and washers securing the assist handle to the retaining clip.
  3. Remove the assist handle from the vehicle.
  4. If replacing the entire assist handle assembly, Remove the retaining clips from the sheet metal.
scientia non olet · About LEMON Manuals